Instructions
Faucets water flow rate adjustment
There are silicone O-rings shipped with every of our aerators. They differ in color and thickness. Based on desired water flow rate, different O-rings are placed inside an aerator. The installation is very simple. Aerator has a plastic white sieve at the inside of it. This sieve is removed by hands. A visible silicone O-ring is then removed by a knife, scissors or any other pointed tool and new ring or rings are put back in. O-rings maximum water flow rate table is shown below. For more detailed instructions with images, please check our detailed instructions here.
Maximum water flow rate options
- 1 gal/min – 2x thick black O-ring
- 1.5 gal/min – 1x thick black O-ring
- 2 gal/min – 1x red O-ring
- 2.5 gal/min – 2x thin black O-ring
- 3 gal/min – 1x thin black O-ring
- 3.5 gal/min – all O-rings removed
Showers water flow rate adjustment
There are silicone O-rings shipped with every of our aerators. They differ in color and hickness. Based on desired water flow rate, different O-rings are placed inside an aerator. The installation is very simple. Aerator has a plastic white sieve at the inside of it. This sieve is removed by hands. A visible silicone O-ring is then removed by a knife, scisors or any other pointed tool and new ring or rings are put back in. O-rings maximum water flow rate table is shown below. For more detailed instructions with images, please check our detailed instructions here.
Maximum shower water flow rate options
- 1.5 gal/min – 1x thick black O-ring
- 2 gal/min – 1x red O-ring
- 2.5 gal/min – 2x thin black O-ring
- 3 gal/min – 1x thin black O-ring
- 3.5 gal/min – all O-rings removed
Toilets water flow rate adjustment
Toilet Water Saver has 5 stailess steel cylinders. The product works as a weight, pressing on toilet system reservoir output valve. More weight means there is more pressure on the outlet valve and it shuts down quicker, flashing less water. The flushed water volume can be adjusted by adding or removing those cylinders.
Maximum water flow rate options for dual flush systems
- Half flush = 0.15–0,75 gallons of water
- Full Flush = 0.75–2.5 gallons of water
Installing Toilet Water Saver in toilet reservoirs
Toilet Water Saver is placed inside water reservoir, there it is hanged up in the overflow tube.
Installation instructions
- Remove top hanger from overflow tube.
- Place Toilet Water Saver inside overflow tube. It is holded there by water saver spring.
- Install top hanger to its original position on the overflow tube.
Installing Toilet Water Saver in dual flush systems
Toilet Water Saver can be easily installed in dual flush wall systems.
Why to install water savers on dual flush systems when they already save water?
By statistic analyses, 75 % of all users use the big button without deciding, if it is necessary. Then, the full reservoir volume is flushed. Toilet Water Saver is the solution.
Installing faucet water saver aerators
Installation is very simple. Water saver aerators are installed the same way a regular aerator is. Before installing it, decide if you want to keep default water flow rate or change it by replacing silicone O-rings. It can be changed at any time in future. If the current aerator is corroded, pliers might be needed to unscrew it.
Instructions
- Unscrew old aerator. Make sure aerator seal was removed as well.
- Remove build-ups and sediments from faucet thread.
- Screw in WATERSAVERS® aerator. Make sure it is screwed in straight and it is fastened well.
- If the aerator doesn't fit on faucet nozzle well or water squirts to sides, unscrew it and repeat previous steps.
Installing shower water savers
Installation is very simple. Water saver is screwed in between shower arm and shower hose. You might need pliers to unscrew shower hose from the arm first. Before installing water saver, decide if you want to keep default water flow rate or change it by replacing silicone O-rings. It can be changed at any time in future.
Instructions
- Unscrew shower hose from shower arm (or shower faucet, if applicable). Make sure hose seal was removed as well.
- Remove build-ups and sediments from shower arm and shower hose. It might help to rinse shower hose thread.
- Screw in WATERSAVERS® shower saver on shower arm (or shower faucet, if applicable). Make sure it is screwed in straight and it is fastened well.
- Screw in shower hose on just installed water saver.